unisonic technologies co., ltd UAD92 diode www.unisonic.com.tw 1 of 3 copyright ? 2015 unisonic technologies co., ltd qw-r601-078.f silicon diode ? description the utc UAD92 is a silicon diode, it uses utc?s advanced technology to provide customers with high average output current. ? features * low v f * super high speed switching ? symbol ? ordering information ordering number package pin assignment packing lead free halogen free 1 2 3 UAD92l-02-t47-t UAD92g-02-t47-t to-247 a k a tube UAD92l-02-t3p-t UAD92g-02-t3p-t to-3p a k a tube UAD92l-02-t47-t (1)packing type (2)package type (3)v rrm (4)green package (1) t: tube (2) t47: to-247, t3p: to-3p (3) 02: 200v (4)l: lead free, g: halogen free and lead free ? marking
UAD92 diode unisonic technologies co., ltd 2 of 3 www.unisonic.com.tw qw-r601-078.f ? absolute maximum ratings (t a =25c, unless otherwise specified.) parameter symbol ratings unit repetitive peak reverse voltage v rrm 200 v average output current (note 1) 50hz square wave duty=1/2, t c =115c per leg i o 10 a total 20 non-repetitive forward surge current (note 2) sine wave, 10ms 1shot i fsm 100 a operating junction temperature t j 150 c storage temperature t stg -40~+150 c note: absolute maximum ratings are those values beyond which the device could be permanently damaged. absolute maximum ratings are stress ratings only an d functional device operat ion is not implied. ? thermal resistance parameter symbol ratings unit junction to case to-247 jc 1.5 c/w to-3p 1.45 c/w ? electrical characteristics (t a =25 c, unless otherwise specified.) parameter symbol test conditions min typ max unit forward voltage (note 2) v f i f =10a 0.95 v reverse current (note 2) i r v r =v rrm 200 a reverse recovery time (note 2) t r r i f =0.1a, i r =0.2a, i rec =0.05a 0.04 s notes: 1. out put current of c enter tap full wave connection. 2. rating per element
UAD92 diode unisonic technologies co., ltd 3 of 3 www.unisonic.com.tw qw-r601-078.f ? typical characteristics 50 0 peak repetitive reverse voltage peak repetitive reverse voltage, v rrm (v) 200 250 400 150 350 0 20 40 60 80 100 120 100 300 utc assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all utc products described or contained herein. utc products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
|
